Control Box Connections; 14-Pin Plug Information For Connecting Wire Feeder To Power Source - Miller D-74 MPa Plus Swingarc w/Drives Manuel Du Propriétaire

5-6. Control Box Connections

5-7. 14-Pin Plug Information For Connecting Wire Feeder To Power Source

J A
K
I
B
L
H N
C
M
G D
F
E
*The remaining pins are not used.
OM-254063 Page16
1
Pin*
A 24 volts AC with respect to socket G.
B Contact closure to A completes 24 volts AC contactor control circuit.
G Circuit common for 24 volts AC circuit.
C +10 volts DC input from power source to wire feeder with respect to socket D.
D Remote control circuit common.
E 0 to +10 volts DC output signal from wire feeder to power source with respect to socket D.
H Voltage feedback; 0 to +10 volts DC, 1 volt per 10 arc volts.
F Current feedback; 0 to +10 volts DC, 1 volt per 100 amperes.
L 0 to +10 volts DC output signal from wire feeder to power source with respect to socket N.
M CC/CV select 0 to +10 volts DC.
N Feeder common.
K Not used.
2
3
Pin Information
1 Interconnecting Cables
2 14 Pin Receptacle
3 Power Connector
4 19 Pin Receptacle
4
Ref. 252426-C / 252428-D