Section 4 − Specifications; Serial Number And Rating Label Location; Unit Specifications; Wire Type, Size, And Feed Speed Capability Table - Miller D-74S Manuel D'utilisation

4-1. Serial Number And Rating Label Location

The serial number and rating information for this product is located inside the case. Use rating label to determine input power requirements and/or
rated output. For future reference, write serial number in space provided on back cover of this manual.

4-2. Unit Specifications

Type of Input Power
24 Volts AC Single-Phase
10 Amperes
50/60 Hertz

4-3. Wire Type, Size, And Feed Speed Capability Table

Motor Speed Wire Type
Standard Speed All
High Speed All

4-4. Environmental Specifications

A. IP Rating
This equipment is designed for indoor use and is not intended to be used or stored outside.
B. Temperature Specifications
Operating Temperature Range
14 to 104°F (−10 to 40°C)
C. Information On Electromagnetic Compatibility (EMC)
!
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.
Notes
OM-252717 Page 12
SECTION 4 − SPECIFICATIONS
Welding Power
Constant Voltage (CV)
DC With 14-Pin And
Contactor Control
Wire Size
.023 To 5/64 in. (0.6 To 2 mm)
.023 To 5/64 in. (0.6 To 2 mm)
Source Type
Rated Speed Range
50 To 780 ipm (1.3 To 19.8 mpm)
90 To 1440 ipm (2.3 To 36.6 mpm)
IP Rating
IP2X
Storage/Transportation Temperature Range
−4 to 131°F (−20 to 55°C)
Weight
30 lb (13.6 kg)
Rated Speed Range
(per IEC 60974-5)
55 To 770 ipm (1.4 To 19.6 mpm)
92 To 1435 ipm (2.3 To 36.5 mpm)
IP2X 2014−06
Temp1_016- 08
ce-emc 3 2014-07