Section 4 − Specifications; Serial Number And Rating Label Location; Unit Specifications; Environmental Specifications - Miller 22A Manuel D'utilisation

4-1. Serial Number And Rating Label Location

The serial number and rating information for this product is located on the rear panel. Use rating label to determine input power requirements and/or
rated output. For future reference, write serial number in space provided on back cover of this manual.

4-2. Unit Specifications

Type of Input Welding Power
Power Source Type
24 Volts AC Single Constant Voltage
Phase (CV) DC With
7 Amperes 50/60 14-Pin And
Hz Contactor Control

4-3. Environmental Specifications

A. IP Rating
This equipment is designed for indoor use and is not intended to be used or stored outside.
B. Temperature Specifications
Operating Temperature Range
14 to 104°F (−10 to 40°C)
C. Information On Electromagnetic Compatibility (EMC)
!
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.
Notes
OM-193472 Page 12
SECTION 4 − SPECIFICATIONS
Wire Feed
Speed Range
75 to 750 ipm
(1.9 To 19 mpm)
Max Spool Weight:
Wire
Welding
Diameter
Circuit Rating
Range
.023 To 5/64 in.
(0.6 To 2 mm)
100 Volts,
500 Amperes,
Max Spool
100%
Capacity:
Duty Cycle
18 in. (457 mm)
60 lb (27 kg)
IP Rating
IP21S
Storage Temperature Range
−4 to 131°F (−20 to 55°C)
Overall
Weight
Dimensions
Length: 23-1/2 in.
(597 mm)
Width: 10-3/4 in.
35 lb (15.9 kg)
(273 mm)
Height: 11 in.
(279 mm)
IP21S 2014−06
Temp_2016- 07
ce-emc 3 2014-07