Section 3 − Definitions; Additional Safety Symbols And Definitions - Miller D-74 MPa Plus Swingarc w/Drives Manuel Du Propriétaire

3-1. Additional Safety Symbols And Definitions

.
Some symbols are found only on CE products.
Warning! Watch Out! There are possible hazards as shown by the symbols.
Do not discard product (where applicable) with general waste.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
facility.
Contact your local recycling office or your local distributor for further information.
Wear dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves.
Protect yourself from electric shock by insulating yourself from work and ground.
Disconnect input plug or power before working on machine.
Keep your head out of the fumes.
Use forced ventilation or local exhaust to remove the fumes.
Use ventilating fan to remove fumes.
Keep flammables away from welding. Do not weld near flammables.
SECTION 3 − DEFINITIONS
Safe1 2012−05
Safe37 2017−04
Safe2 2017−04
Safe3 2017−04
Safe5 2017−04
Safe6 2017−04
Safe60 2012−06
Safe61 2012−06
Safe62 2012−06
OM-254063 Page 9