Télécharger Imprimer la page

Husqvarna SM 610 2007 Manuel D'atelier page 496

Publicité

NOTE PER I MODELLI USA/CDN- AUS
NOTES FOR USA/CDN- AUS MODELS
NOTE POUR LES MODÈLES USA/CDN- AUS
ANMERKUNG FÜR MODELL USA/CDN- AUS
NOTAS POR LOS MODELOS USA/CDN- AUS
NOTES FOR AUS, USA/CDN MODEL
SM 610
TE 610
Tampering warning
Tampering with Noise Control System Prohibited.
Federal law prohibits the following acts or causing thereof:
(1) The removal or rendering inoperative by any person other than for purposes of maintenance, repair, or replacement,
of any device or element of design incorporated into any new vehicle for the purpose of noise control prior
to its sale or delivery to the ultimate purchaser or while it is in use, and
(2) the use of the vehicle after such device or element of design has been removed or rendered inoperative by any
person.
Among those acts presumed to constitute tampering are the acts listed below.
1) Removal of, or puncturing the muffler, baffles, header pipes or any other component which conducts exhaust gases.
2) Removal or puncturing of any part of the intake system.
3) Lack of proper maintenance.
4) Replacing any moving part of the vehicle, or parts of the exhaust or intake system, with parts other than those
specified by the manufacturer.
Warning statement
This product should be checked for repair or replacement if the motorcycle noise has increased significantly through
use.
Otherwise, the owner may become subject to penalties under state and local ordinances.
Part. N. 8000 A8466 (12-2006)
Z.2

Publicité

loading

Ce manuel est également adapté pour:

Te 610 2007