Burner Removal; Valve Removal - Napoleon Acies Série Manuel D'installation

13.3 burner removal

A.
Remove the safety barrier and glass door (see "safety barrier installation / removal" and "door instalaltion /
removal" sections).
B.
Remove the media from the appliance (see "glass media installation / removal" section).
C.
Remove the pilot housing by removing the screws.
D.
Remove the screws that secure the media tray in place. Lift the burner assembly up and out of the
appliance.

13.4 valve removal

A.
Remove the safety barrier and glass door (see "safety barrier installation / removal" and "door installation /
removal" sections).
B.
Remove the media tray and burner assembly (see "burner removal" section).
C.
Disconnect the fl ex connector from the valve. Remove the valve wire connections, labeling each one to
aid with re-connection.
D.
Remove the screws from the valve bracket and remove the valve.
E.
Replace all components before returning the appliance to service.
F.
Check for gas leaks by brushing on a soap and water solution.
maintenance
L38 Illustrated
W415-2033 / B / 02.04.20
EN
61