Optional Media Placement; Logo Placement - Napoleon Acies Série Manuel D'installation

fi nishing
EN
11.9

optional media placement

If using sand as media, media trays are required. Consult your authorized dealer.
Media should be installed evenly across the burner tray but not directly on the burner ports themselves. Never
place media directly on the burner ports as this can result in carboning or an unappealing fl ame characteristic. For
propane, refer to conversion kit. Never place media in the pilot housing or over the pilot. Always check that the
appliance ignites smoothly across the entire burner to ensure media does not compromise performance. To install
optional media, refer to instruction leafl et included with the media kit.

11.10 logo placement

Remove the backing of the logo supplied and place, as illustrated.
1"
(25mm)
LOGO
1"
(25mm)
56
W415-2033 / B / 02.04.20