Burner Removal; Log Burner Removal; Glass Burner Removal - Napoleon Ascent Multiface Serie Manuel D'installation Et D'opération

12.4

burner removal

12.4.1 log burner removal

Remove the main door(s) from the appliance see "main door removal / installation" section.
A.
Carefully remove the charcoal embers, charcoal lumps, glowing embers and logs from the appliance.
B.
Remove all of the hearth pads, from the appliance. Refer to the "hearth pad installation / removal" section.
C.
Remove the 4 screws securing the burner in place. Then slide the burner off the orifice and remove from
D.
the appliance.
To reinstall the burner, reverse these steps.
E.
note:
When reinstalling the burner, ensure that the venturi rest on the orifice.

12.4.2 glass burner removal

Remove the main door(s) from the appliance see "main door removal / installation" section.
A.
Vacuum the glass media out of the appliance. Ensure you insert a clean bag into your vacuum cleaner.
B.
Remove the 12 screws securing the media tray, then remove the media tray from the appliance, as shown
C.
below.
Remove the 4 screws securing the burner, as shown below. Then slide the burner off of the orifice and
D.
remove from the appliance.
To reinstall the burner reverse these steps.
E.
note:
When reinstalling the burner, ensure that the venturi rest on the orifice.
D
D
C
maintenance
53
W415-1285 / H / 08.07.18
EN