Electrical Information; Hard Wiring Connection; Receptacle Wiring Diagram; In The Event Of A Power Failure - Napoleon Acies Série Manuel D'installation

Masquer les pouces Voir aussi pour Acies Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6.1

hard wiring connection

It is necessary to hard wire this appliance.
Permanently framing the appliance with an enclosure, requires the appliance junction box to be hard wired. This
appliance must be electrically connected and grounded in accordance with local codes. In the absence of local
codes, use the current CSA C22.1 Canadian Electrical Code in Canada or the ANSI/NFPA 70-1996 National
Electrical Code in the United States.
6.2

receptacle wiring diagram

Route power supply and optional LHAD (Linear Hot Air Distribution) kit through the outer fi rebox to the receptacle
mounted on the bottom of the appliance. For optional LHAD kit installation, please refer to the leafl et provided in
the kit.
6.3

in the event of a power failure

If the battery holder is equipped with 4 "AA" batteries, the appliance will still have on/off functions during a power
failure.

6.0 electrical information

cable connector holes
L1
L2
To optional LHAD kit
electrical information
Power Supply
Cable Connector
W415-2033 / B / 02.04.20
EN
35

Publicité

Chapitres

Table des Matières
loading

Table des Matières