Napoleon Acies Série Manuel D'installation page 49

WARNING
!
• Non-combustible fi nishing material tight to the frame around the fi nishing fl ange must not project more than
4" (10cm) from the face of the safety barrier (above the door and sides only). If greater projections are needed,
increase the clearance to the sides and top by a minimum of 2" (51mm) for every 1" (25mm) projection.
4" (10cm)
Maximum
protrusion
(must not encroach
on finishing flange)
SIDE VIEW
1"
25mm
2"
51mm
SAFETY
BARRIER
fi nishing
4"
10cm
Max
finishing
flange all
around
49
W415-2033 / B / 02.04.20
EN