Burner Removal; Log Burner Removal (Hd4St And Hd4P Only); Glass Burner Removal (Hd4Stg And Hd4Pg Only) - Napoleon HD4N Instructions D'installation Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

10.4 BURNER REMOVAL

10.4.1

LOG BURNER REMOVAL (HD4ST AND HD4P ONLY)

Remove the door(s) refer to the "DOOR REMOVAL/INSTALLATION" section for instructions.
A.
Carefully remove the logs from the appliance.
B.
Remove all of the hearth pads, from the appliance. Refer to the "HEARTH PAD INSTALLATION/
C.
REMOVAL" section for instructions.
Remove the 4 screws securing the burner in place. Then slide the burner off the the orifi ce and remove
D.
from the appliance.
To reinstall the burner reverse these steps. NOTE: When reinstalling the burner ensure that the
E.
venturi rests on the orifi ce.
10.4.2

GLASS BURNER REMOVAL (HD4STG AND HD4PG ONLY)

Remove the door(s) refer to the "DOOR REMOVAL/INSTALLATION" section for instructions.
A.
Vacuum the glass media out of the appliance. Ensure you insert a clean bag into your vacuum cleaner.
B.
Remove the 12 screws securing the media tray, then remove the media tray from the appliance, as
C.
shown below.
Remove the 4 screws securing the burner, as shown below. Then slide the burner off of the orifi ce and
D.
remove from the appliance.
To reinstall the burner reverse these steps. NOTE: When reinstalling the burner ensure that the
E.
venturi rests on the orifi ce.
D
D
C
47
EN
W415-1146 / A / 02.16.13

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Hd4p

Table des Matières