Burner Removal; Log Burner Removal; Glass Burner Removal - Napoleon BHD4N Instructions D'installation Et D'opération

10.4 BURNER REMOVAL

10.4.1

LOG BURNER REMOVAL

Remove the door(s) refer to the "DOOR REMOVAL/INSTALLATION" section for instructions.
A.
Carefully remove the logs from the appliance.
B.
Remove all of the hearth pads, from the appliance. Refer to the "HEARTH PAD INSTALLATION/
C.
REMOVAL" section for instructions.
Remove the 4 screws securing the burner in place. Then slide the burner off the the orifi ce and remove
D.
from the appliance.
To reinstall the burner reverse these steps. NOTE: When reinstalling the burner ensure that the
E.
venturi rests on the orifi ce.
10.4.2

GLASS BURNER REMOVAL

Remove the door(s) refer to the "DOOR REMOVAL/INSTALLATION" section for instructions.
A.
Vacuum the glass media out of the appliance. Ensure you insert a clean bag into your vacuum cleaner.
B.
Remove the 12 screws securing the media tray, then remove the media tray from the appliance, as
C.
shown below.
Remove the 4 screws securing the burner, as shown below. Then slide the burner off of the orifi ce and
D.
remove from the appliance.
To reinstall the burner reverse these steps. NOTE: When reinstalling the burner ensure that the
E.
venturi rests on the orifi ce.
C
51
EN
D
W415-1285 / 04.14.14