Configuration Of Rotopol-22; Setting Auto Mode When Rotoforce-3 Or -4 Is Mounted; Setting 2-Disc System When Rotoforce-1 Is Mounted - Struers RotoPol-21 Mode D'emploi

Configuration of RotoPol-22

Setting AUTO MODE when
RotoForce-3 or -4 is mounted
Setting 2-DISC SYSTEM
when RotoForce-1 is mounted
24
RotoPol-21/-22/-25
Instruction Manual
As RotoPol-22 contains two individually controlled discs, there are
some additional options.
One disc can be used for automatic preparation and the second
disc can be used for manual preparation.
m
Press MENU
AUTO MODE
ON
L L
AUTO MODE
OFF
o
Press STOP when the desired setting appears.
If both discs are to be used with the RotoForce sample movers,
they should both be set to AUTO MODE ON.
1 or 2 RotoForce-1 sample movers can be mounted on RotoPol-22.
To start only RotoForce-1 with the respective disc,
set 2-DISC SYSTEM to YES.
m
Press MENU
2-DISC SYSTEM
NO
L L
2-DISC SYSTEM
YES
o
Press STOP
to activate the setup menu.
Move to the AUTO MODE screen using the
m
MENU key.
Press SELECT L to toggle between ON or
OFF.
- Select ON for the disc to be used for
automatic preparation.
- Select OFF on the disc to be used for
manual preparation.
to activate the setup menu.
Move to the 2-DISC SYSTEM menu using
m
the MENU key.
L
Press SELECT
or YES.
- Select YES for both discs.
when the desired setting appears.
to toggle between NO