Sonnenkonig FRESCO 141 Manuel De L'utilisateur page 74

Timer
AUTO shut off: In fan mode, press the timer button and select the number of hours for
how long the appliance runs in cooling mode until it switches off automatically.
AUTO switch on: When the appliance is turned off, press the timer button to select the
number of hours until the appliance should start in cooling mode.
GB
Setting the Timer / Temperature
• To set the timer and the thermostat.
• The standard display indicates the room temperature.
• When «+» or «-» are pressed in cooling mode, the temperature setting will be shown
and can be adjusted.
After 15 seconds, the display changes to room temperature. The temperature can only
be adjusted in cooling mode. The time can be set from 1-24 hours. Note: The display
can be switched from Celsius to Fahrenheit and vice versa by pressing the two buttons
Timer/Temp Set.
After switching off the air condition, you need to wait for 3 minutes before turning it
on again.
74