Sonnenkonig FRESCO 141 Manuel De L'utilisateur page 71

Air conditioner with integrated exhaust air hose
If necessary, you can also install your appliance semi-permanently or permanently (Fig. 1).
1. Drill a hole through an exterior wall or through
a window pane. Note the height and the di-
mensions of the hole (Fig. 2).
2. Install the appropriate connector.
3. Insert the exhaust air hose into the housing at
the back of the appliance.
4. Connect the other end of the exhaust air hose
to the connector (Fig. 3).
If the hose is not in use, place the protective cover
onto the outer connector to cover the opening.
Note :
When installing the appliance semi-permanently,
there should always be a slightly open door (1 cm)
to ensure adequate ventilation.
A. In the window pane
B. In the window sill of a French window
C. In the wall: We recommend insulating the drilled hole with a suitable insulation.
A B
Fig. 2
Safety guard
Fig. 1
C
Fig. 3
71
GB
Cover