Installation - Sonnenkonig FRESCO 141 Manuel De L'utilisateur

5 Installation

Connect the exhaust hose component set to the back of the appliance. Extend the hose
GB
to achieve the desired length, and push the exhaust nozzle through a window to remove
the suctioned air.
Exhaust hose set – assembly and installation
Exhaust nozzle
(1 part)
1.To attach the two exhaust connectors, screw the ends of
the exhaust hose anticlockwise until they stop.
2.Attach one of the exhaust hose connectors to the rear
outlet on the appliance. To do so, position the exhaust
hose connector on top of the outlet on the appliance and
push down. Ensure that the studs on the exhaust hose
connector engage with the grooves of the connector on
the appliance.
3.Attach the exhaust nozzle to the other exhaust hose con-
nector.
4.Extend the exhaust hose, push it through a window, close
the window as far as possible, and clamp the exhaust noz-
zle as shown below.
Exhaust hose
connector ( 2 parts )
Interieur
Exhaust hose (1 part )
70
Outgoing air hose
Interieur