Appendix A Functional Checks; A.1 Locator Functional Check - Leica Digisystem i780231 Manuel De L'utilisateur

Digisystem, Functional Checks
Appendix A
A.1
Checking the function
Functional Checks
Locator Functional Check
Before any tests can be carried out it is vital to check the status of the unit, its batteries
and basic functionality.
The following list is used to achieve this.
1. Inspection
• Casing
• Labels
• Battery hatch
• Battery holder
• Battery contacts
Once the general condition of the Locator is established the Audio Visual test can be
performed.
2. Audio / Visual display test
Upon depressing the trigger the Locator should test the display and speakers by illuminating
each segment in the bar display, the mode and function indicators and depth display, the
battery indicator light will illuminate throughout the display test. All LCDs must be operative
and an audible output must be heard.
The casing should be free of significant damage.
Body labels must be legible and intact. Display label must be
free of damage and tears.
The hatch must lock into place.
All the battery contacts and springs on the holder must be free
of corrosion and the holder in good condition.
The battery contacts must be free of corrosion.
86