Digisystem, Technical Data
10.2
Typical detection range
Operating transmission
frequencies
Display panel
Keypad
Integral Speakers
Internal battery
Transmitter Technical Data
Mode
Induction mode
Connection mode
• 8.192 (8) kHz or
• 32.768 (33) kHz
• 2 LED Mode Indicators
• 4 LED Frequency Indicators
• LED Battery Status Indicator
• 3 LED Power Output Indicators
4 membrane push buttons
Audio Volumes:
Tone:
Type:
Typical operating time:
Output
Up to 1W max.
Up to 1W max. when connected to a buried
service with an impedance of 100 Ω.
85 dBA @ 30 cm
8 kHz mode: Low pitched tone
33 kHz mode: Higher pitched tone
Induction mode: Pulsed tone
Connection mode: Pulsed tone when poor or no current output,
continuous tone when good connection
4 x D alkaline (IEC LR20), supplied
30 hrs intermittent use at 20 °C / 68 °F
74