Wireless Data Communication, Where Applicable - Leica Digisystem i780231 Manuel De L'utilisateur

Digisystem, How to Use the Locator
2.6
Bluetooth
Pairing information


Wireless Data Communication, where applicable

Bluetooth status is indicated on the locators display, the Bluetooth symbol will be illumi-
nated on all locators with Bluetooth connectivity. Data can be wirelessly transferred from
a Bluetooth enabled Locator to a suitable data logging device, enabling the operator to
capture information about the Locator's status and the service depth. When the Locator is
paired to a suitable device, the Bluetooth symbol will flash, and the unit will transmit data
periodically.
Important information for pairing:
• The Locator must be switched on throughout the process
• Follow the instructions on the device for pairing. Refer to the manufacturer's
instructions.
Locator Name:
Pass key:
• The Bluetooth symbol will flash continually when the devices have successfully paired.
• When a depth reading has been taken, the Locator will display LOG. To transfer the infor-
mation to the data logger press the i Button whilst LOG is displayed.
• Whilst the Locator is calculating depth the data output stops.
• If there is no wireless communication then the LOG function will not be displayed and the
unit will function as a Locator.
• The Locator will output ASCII text.
Refer to "ASCII text description" for more information.
'Model Number' - 'Serial Number'
for example: 550-000001
12345
28