Locator Setup And Information - Leica Digisystem i780231 Manuel De L'utilisateur

2.3
Locator settings
Digisystem, How to Use the Locator

Locator Setup and Information

The i-Series Locators offer a range of settings which the operator can adjust to their own
preference. It also displays additional service and contact information as detailed.
Setting Description
EST Performs a function check on the locators hardware and software,
displaying PAS if the Locator is within predefined tolerance or ERR if the
locator is not.
H.Z Switches hazard zone on or off.
VOL Adjust volume level (0 - 10).
HLD Adjust peak hold duration (0 - 5 seconds).
SSI Displays a numeric signal strength indicator.
CST Adjusts display's contrast (0 - 15).
M/I Displays unit of measurement.
CAL Displays the next service date DD/MM/YY.
CON Displays supplier/company name.
TEL Displays supplier/company telephone number.
I.D Displays the operator's name.
PWR Displays the power mode regional setting. Refer to "Appendix B World
Frequency Zones" for more information.
SR# Displays unit serial number.
VER Displays software version.
CLK Displays the date held within the locators memory. Format
(600i & 650i) DD/MM/YY/HH/MM/SS.
15