Leica Digisystem i780231 Manuel De L'utilisateur page 30

ASCII text description
Digisystem, How to Use the Locator
ASCII output pattern:
DVxxxSNxxxxxxSVxxxxTMxxxxxDTdd/mm/yyCMxxSTxBTxMDxSSxxUMxDPxxxx
Data Range
output
DV 000 to 999
SN 000000 to 999999
SV 0.00 to 9.99
TM 00:00 to 23:59
DT 00/00/00 to
31/12/99
CM 00 to 15
ST 0 or 1
BT 0 to 9
MD 0 to 4
SS 01 to 48
UM M or I
DP 0.30 to 3.00 or ---
Example value Description
550 Model identifier
123456 Serial number
3.01 Software version
08:30 Time: hh:mm
(default = 00:00; no RTC fitted)
01/12/10 Date: dd/mm/yy
(default = 00/00/00; no RTC fitted)
12 Number of months until next
calibration (00 to 15)
0 Self test: 0 = Pass, 1 = Fail
7 Battery level: 0 = Empty, 9 = Good
3 Mode: 0 = Power, 1 = Radio,
2 = 8 kHz, 3 = 33 kHz, 4 = Auto
16 Signal strength: 01 to 48
M Units of measurements:
M or I (Metres or Imperial)
125 Depth value displayed depends on
value for UM.
29