2.2
Locator main parts
Digisystem, How to Use the Locator
Locator Overview
The case foot can be replaced if it is worn. Contact your agency or Leica Geosystems author-
ised service workshop.
a
b
c
d
e
a) Display Panel
Contains the operational controls.
b) Speakers (mounted internally left and right)
Active at power on and when a signal is detected.
c) On/Off Trigger
Press and hold the trigger to activate the Locator.
Release the trigger to deactivate.
d) Battery Hatch Release
Pressing the release button unlocks the battery
hatch allowing access to the battery compartment.
e) Battery Compartment
6 x LR6 (AA) alkaline batteries are used. Replace all
f
batteries when indicated.
f) Case Foot
13