Leica Digisystem i780231 Manuel De L'utilisateur page 17

Digisystem, How to Use the Locator
Accessing and
adjusting the settings
Danger
Changing the battery
1. Switch the Locator on.
2. Ensure the Locator is in Power mode.
If required, press Function Button to select mode.
3. Depress the i Button until the user settings are displayed in the display readout.
4. Press Function Button to toggle through to desired setting.
5. Press i Button to select the setting.
6. Press Function Button to activate/adjust.
7. Press i Button to store and exit.
The Locator may fail to detect electrical services in Power mode if an incorrect power setting
is used.
Precautions:
Before use, verify the Locator is setup to be compatible with mains frequency supply in your
country. Options are 50 or 60 Hz. Refer to "Appendix B World Frequency Zones" for more
information.
Contact your agency or Leica Geosystems authorised service workshop if your unit is incor-
rectly configured for your region.
1. Replace the batteries when the battery
status indicator is empty.
2. Press the release button to unlock the
Battery Hatch. Remove the battery
holder from the Locator.
3. Replace all batteries with six new
LR6 (AA) type alkaline batteries, or
remove and recharge the battery pack if
rechargeable batteries are fitted.
16