Summary; Assembly; Assembling The Curved Handle; Installing The Grass Catcher - Grizzly ERM 1637 G Traduction De La Notice D'utilisation Originale

GB

Summary

1 Curved handle
2 Start lever
3 Top clamping levers
4 Lower bar
5 Collision guard
6 Bottom clamping levers
7 Grass catcher
8 Back wheels
9 Front wheels
10 Housing
11 Cutting height adjuster
12 2 carrying handles
13 Cable holder
14 Cable strain relief
15 Connection cable
16 Release button (not visible)
17 Power inlet

Assembly

Disconnect the plug before any
work on the equipment. There is a
risk of injury.

Assembling the Curved Handle

Install lower bar:

Slightly spread the ends of the
lower bar (4) and place them on
the threaded bolts on the right
and left of the housing.
‚ Put on the washers from the
package and screw on the bot-
tom clamping levers (6).
ƒ Tip up the bottom bar (4) to your
favourite angular position.
Lock the bottom clamping levers
(6) by pushing them towards the
bar (4). Clamping levers to be
tightened and contacting the bar
such that they clamp at average
force.
26
Otherwise you may have to
tighten (turn clockwise) or loos-
en them (turn anticlockwise).
Attach cable strain relief:
Push the cable strain relief (14)
over the bottom bar (4).
Install curved handle:
1. Use the screws and washers
from the package as well as the
top clamping levers (3) to mount
the curved handle (1) on the
right and left ends of the bottom
bar (4). Three positions are pos-
sible.
2. Turn the clamping levers (3)
clockwise.
3. Lock the clamping levers (3)
by pushing them towards the
bar (4). Clamping levers to be
tightened and contacting the bar
such that they clamp at average
force.
Otherwise you may have to
tighten (turn clockwise) or loos-
en them (turn anticlockwise).
Clip on the cable hook:
Clip on the cable hooks (
to the bottom bar to fasten the
connection cable (

Installing the grass catcher

Assemble the grass catcher:

Clip the rubber lip of the grass
catcher net (19) into the hard
plastic tray of the grass catcher
(7).
‚
Insert the linkage tubes (19)
into the grass catcher net (20).
Make sure to fully insert the
tubes (see ill. detail).
13)
15).