F- Electronic Programmer Operation - Porter & Charles FEC60B Série Instructions D'installation

F - Electronic Programmer Operation
The 24 hour clock allows the setting of automatic cooking options up to 24 hours in
advance.
1 - Minus Time Button
2 Mode (Countdown Timer with Alarm, Cooking duration, End Time)
3 + Plus Time Button
IMPORTANT – NOTE FOR NEW INSTALLATION AND FIRST OPERATION
Setting the time on the 24 hour clock
1- The clock will require setting when you first turn on the power (or following a power
failure).
2- At power on, the relay contact is opened. The display and AUTO symbol flashes and
time of day starts from 0:00.
3- Press PLUS and MINUS button simultaneously for minimum 3 seconds. The AUTO
symbol goes out, POT symbol
button the time will advance slowly, and then speed up. If you over-shoot the desired
time, use the MINUS button).
4- Press the MODE button twice to display the time of day. The oven will be in manual
cooking mode, with POT symbol
5- The oven is now ready for use and to accept the selected cooking functions.
Setting the Timer
6- The timer can be set for countdown up to 24 hours and for automatic cooking modes up
to 10 hours and will countdown to zero. When zero is reached the alarm will sound.
7- To set the countdown timer
a. Press the MODE button for minimum 3 seconds.
b. The BELL symbol is flashing and the display shows 0:00.
c. Using the PLUS button advance the timer to the desired time.
8- Once the countdown timer is set, the normal time of day will return to the display within 7
seconds. If you wish to check how much time remains on the countdown, press the
MODE button for 3 seconds. The remaining time will be displayed. After 7 seconds the
normal time will return to the display.
9- A digital alarm will sound when time is reached. To silence the alarm press the MODE
button for minimum 4 seconds.
Adjusting the tone of the electronic timer alarm.
goes on, and the DOT is flashing. With the PLUS
displayed.
16