Porter & Charles FEC60B Série Instructions D'installation page 22

To operate Single (inner zone) and separate Dual (inner + outer zone) follow
this procedure:
NOTE: On dual zone elements setting 12 has 2 positions.
Single Inner Zone - rotate control knob in clockwise direction selecting power from 1 through 12.
The inner zone only will operate.
Inner + Outer Zone = Full Power - rotate control knob clockwise from 1 to 12 as above, then
through position 2 - a click will sound (do not Rotate control knob all the way to OFF position
as this will damage the control switch and turn power OFF). Then rotate control knob
backwards (anticlockwise) selecting power level from 1 to 12 as before. This will activate both
Inner and Outer zones concurrently for maximum power.
To deactivate (turn off) Inner Zone or Inner + Outer Zone the control knob must be returned to
the OFF position.
Important Note:
DO NOT TURN CONTROL KNOB ANTICLOCKWISE FROM OFF POSITION AS THIS WILL
DAMAGE THE CONTROL MECHANISM - OPERATE SINGLE AND DUAL ZONES STRICTLY
ACCORDING TO THE INSTRUCTIONS AS ABOVE.
22