Printouts - Radiometer Analytical MeterLab PHM220 Mode D'emploi

An explanation is given here of the printouts available when a printer
is connected to the PHM220. Printout layout is described and
illustrated and information is provided about the type of data printed
and when this will occur. Specific information can be found on the
following pages, and in the order shown, concerning:
• Calibration Results
• Sample Results
• Edit Data
• GLP Data
How to obtain printouts:
The Print key can be pressed during a sample measure-
Print
ment but is inactive during a calibration.
When the Mode key is pressed followed by the Print key,
Mode
calibration, sample and method setup parameters are printed
out.
When the GLP key is pressed followed by the Print key, a
GLP
summary of up to 9 calibration or 25 sample measurement
results is printed out.
Results of sample measurements and calibrations
are printed automatically when a printer is connected.

Printouts

43
Printouts