Technical Data; Contents List; Suggested Connections - SKF THHP 300 Mode D'emploi

2.2 Technical data

Designation
Description
Maximum pressure
Volume per stroke 1st Stage
Volume per stroke 2nd Stage
Oil reservoir capacity
Pressure gauge
Hose Length
Hose connection threads
Maximum torque for M16 thread
Main dimensions of the Pump
(without hose and gauge)
Dimensions of the carrying case
Weight of the pump
Weight of the full carrying case

Contents list

2.3
The THHP 300 is supplied complete with a range of
accessories as described in
Here below the descriptions.
Item
A
B
C
D
E
F
G
H
I
J

2.4 Suggested connections

The THHP comes complete with all components to
connect it to the most common applications with
G1/4 or G3/4 connections. The recommend way to
connect is shown in
Fig. 2
Dimensions of the available connection nipples can
be found in .
Fig. 3
.
Fig. 1
Description
THHP 300 Pump body
High pressure hose (assembled)
Pressure gauge and protection sleeve
Quick connection coupling (assembled)
Connection nipple M16male - G1/4male
Connection nipple M16male - G3/4male
Quick connection nipple (loose item)
Mounting fluid (1 litre)
Tool case (empty) for THHP 300
Instructions for use MP5501 SKF THHP 300
.
SKF THHP 300
High pressure pump
300 MPa (43 500 psi.)
40 cm 3 (2.43 in 3 ) – below 1.6 MPa (232 psi.)
0.5 cm 3 (0.03 in 3 ) – above 1.6 MPa (232 psi.)
1.8 litres (110 in 3 ) / 1.6 litres (97.6 in
0-300 MPa / (0-43 500 psi): Diameter 100 mm (4 in)
Accuracy 1% of full scale
2 m (78 in)
G1/4 female to pump
M16 male thread with special sealing design to attach to
the quick connection coupling.
40-50 Nm / (29.5-36.9 ft-lb)
574 x 130 x 200 mm ( 22.6 x 5.1 x 7.9 in)
920 x 318 x 380 mm (36.2 x 12.5 x 15.0 in)
7.5 kg (16.5 lb) with full oil reservoir
20.4 kg (45 lb)
3 ) (usable)
5
EN