Description; Technical Data - SKF 729124 Mode D'emploi

1. Description

The 729124 has a maximum pressure of 100 MPa (14 500 psi) and delivers a volume
per stroke of 0,5 cm (0.03 in
3
and for mounting or dismounting bearings or components with an interference fit applying
the SKF Oil Injection Method, where a maximum pressure of 100 MPa is required.
The pump is supplied with a 1,5 metre long, high pressure hose with quick connection
coupling. Mating quick connection nipple for attachment to the workpiece is included. The
pump is filled with SKF mounting fluid LHMF 300 and comes with an additional 1 litre can
with the same fluid. Everything is packed in a sturdy plastic case. The pump has an over-
pressure valve and a pressure gauge. The release valve is an integrated part of the pump
head.

2. Technical data

Designation
Maximum pressure
Volume per stroke
Oil container capacity
Handle force at 100 MPa
Pressure hose
Connection nipple
Oil viscosity of mounting fluid
Weight (filled with oil)
SKF 729124
). The pump is suitable for SKF hydraulic nuts (≤ HMV 54),
3
729124
100 MPa (14 500 psi)
0,5 cm (0.03 in
3
250 cm (15 in
3
300 N (66 lbf)
1,5 m (5 ft) long with quick connection coupling
G / external or internal thread
1
4
300 mm /s (1 400 SUS) at 20 °C
2
3,5 kg (8 lb)
)
3
)
3
5