Eu Declaration Of Conformity; Application; Description; General Description - SKF THHP 300 Mode D'emploi

EU Declaration of Conformity

THHP 300
We, SKF MPT, Meidoornkade 14, 3992 AE Houten,
The Netherlands herewith declare under our sole
responsibility that the products described in these
instructions for use, are in accordance with the
conditions of the following Directive(s):
MACHINERY DIRECTIVE 2006/42/EC
and are in conformity with the following standards:
EN-ISO 12100:2010, EN ISO 14121-1,
ISO 4413:2010
Houten, The Netherlands, August 2021
Mrs. Andrea Gondová
Manager Quality and Compliance
UK Declaration of Conformity
THHP 300
We, SKF MPT, Meidoornkade 14, 3992 AE Houten,
The Netherlands herewith declare under our sole
responsibility that the products described in these
instructions for use, are in accordance with the
conditions of the following Directive(s):
Supply of Machinery (Safety) Regulations 2008
(2008 No. 1597)
and are in conformity with the following standards:
EN-ISO 12100:2010, EN ISO 14121-1,
ISO 4413:2010
The person authorised to compile the technical
documentation on behalf of the manufacturer is
SKF (U.K.) Limited, 2 Canada Close, Banbury,
Oxfordshire, OX16 2RT, GBR.
Houten, The Netherlands, August 2021
Mrs. Andrea Gondová
Manager Quality and Compliance
4
EN

1. Application

The SKF High Pressure Pump, THHP 300, is
intended for the mounting and dismounting of
pressure joints using the SKF Oil Injection Method.
This includes such applications as couplings, gears,
pulleys, flywheels and SKF OK Couplings; where the
surface pressure is often in the region of
250 N/mm 2 (250 MPa, 2 500 bar, or 36 260 psi).
The high pressure generated by the THHP 300
should not be used with standard hydraulic
cylinders, jacks and other such equipment, which
generally require 70 N/mm
or 10 150 psi).

2. Description

2.1 General description

The SKF High Pressure Pump THHP 300 consists
of a high pressure pump with a 0-300 MPa
(0-43 500 psi) pressure gauge mounted and
includes a high pressure hose and a quick
connection coupling. A loose quick connection nipple
(THPN 300-1) is supplied and can be attached to
the G1/4 and G3/4 conversion nipples included, to
suit the application.
The design allows oil to be automatically
returned to the reservoir, once the pressure is
released, minimizing the risk of oil leakage to the
environment.
2 (70 MPa, 700 bar,