Description; Technical Data - SKF TMJL 50 Mode D'emploi

1. Description

The TMJL 50 has a maximum pressure of 50 MPa
(7 250 psi) and delivers a volume per stroke of
3,5 cm 3 (0.21 in 3 ).
It is mainly intended for use on the low pressure
side of OK-couplings but is also suitable for other oil
injection applications where a maximum pressure
of 50 MPa (7 250 psi) is required. The pump is
supplied with a 3 metre long, high pressure hose
with quick connection coupling. Mating quick

2. Technical data

Maximum pressure
Volume per stroke
Oil container capacity
Handle force at 50 MPa
Pressure hose
Connection nipple
Oil viscosity of mounting fluid
Weight (filled with oil)
Designation
4
EN
connection nipple for attachment to the workpiece
is included.
The pump is filled with SKF mounting fluid
LHMF 300 and comes with an additional
1 litre can with the same fluid. Everything is packed
in a sturdy case.
The pump has an over-pressure valve and a
connection port for pressure gauge.
The release valve is an integrated part of the pump
head.
50 MPa (7 250 psi)
3,5 cm 3 (0,21 in 3 )
2 700 cm 3 (165 in 3 )
310 N (70 lbf)
3 m (10 ft) long with quick connection coupling
G 1 / , external or internal thread
4
300 mm /s (1 400 SUS) at 20 °C
2
12 kg (26 lb)
TMJL 50