Description; Technical Data - SKF 729124 Mode D'emploi

1. Description

The 729124 has a maximum pressure of 100 MPa
(14 500 psi) and delivers a volume per stroke of
0,5 cm 3 (0.03 in 3 ).
The pump is suitable for SKF hydraulic nuts
(≤ HMV 54), and for mounting or dismounting
bearings or components with an interference fit
applying the SKF Oil Injection Method, where a
maximum pressure of 100 MPa is required.
The pump is supplied with a 1,5 m (5 ft) long,

2. Technical data

Designation
Maximum pressure
Volume per stroke
Oil container capacity
Handle force at 100 MPa
Pressure hose
Connection nipple
Oil viscosity of mounting fluid
Weight (filled with oil)
4
EN
high pressure hose with quick connection coupling.
Mating quick connection nipple for attachment to
the workpiece is included. The pump is filled with
SKF mounting fluid LHMF 300 and comes with an
additional 1 litre can with the same fluid.
Everything is packed in a sturdy plastic case. The
pump has an overpressure valve and a pressure
gauge. The release valve is an integrated part of the
pump head.
729124
100 MPa (14 500 psi)
0,5 cm 3 (0.03 in 3 )
250 cm 3 (15 in 3 )
300 N (66 lbf)
1,5 m (5 ft) long with quick connection coupling
G / external or internal thread
1
4
300 mm /s (1 400 SUS) at 20 °C (68 °F)
2
3,5 kg (8 lb)