Delivery Contents; Dimensions And Weight; Equipment; Workpieces - Rothenberger BS 450 Instructions D'utilisation

• Compensation for warmth-induced expansion of the saw band with band-tensioning device
Cut quality
• Precision guides for straight cuts
• High saw-band speed for optimal cut quality
Operation
• Exact adjustment of saw angle possible with angle scale at front
• Adjustable miter on one side 0 ° to 45 ° by swiveling saw bow
• Visual cutting indicator for quick positioning of workpiece
Special Equipment
• Visual cutting indicator for quick positioning of workpiece
• V-support for processing small pipe diameters
• Attachment for radius cuts for front sawing of radii of various sizes
3.2

Delivery contents

The delivery contents consist of:
• BS 450
• 1 control box
• 1 saw band
• 8 plastic screw feet
• 1 operating manual
3.3

Dimensions and weight

Length ............................................................1250 mm
Width ..............................................................1700 mm
Height .............................................................2090 mm
Weight, ca.......................................................160 kg
Transport dimensions:
Transport width ca. .........................................1250 mm
Transport length ca. ........................................1600 mm
Transport height (with wooden blocks), ca. .....1720 mm
3.4

Equipment

Saw band:
Dimensions ............ 3590 x 10 x 0,65 mm
Tooth pitch (Tz) ..... 4 or 6 ZpZ (depending on wall thickness of workpiece)
Caution!
Saw bands that jump off the spool may injure the operator or cause material
damage.
Use original saw bands from the machine's manufacturer. Saw bands from other
providers may jump off the spool and injure the operator or cause material damage
to the machine or workpiece!
3.5

Workpieces

Type of material ..................... PE, PP, PVC, PVDF plastics (other types of plastics after consul-
Profile .................................... Pipes and profiles
min. diameter ......................... 50 mm
max diameter ......................... 450 mm
min. length ............................. The workpiece must be tensioned fasten with pipe clamping de-
tation with manufacturer)
vice.
ENGLISH 41