• It is imperative to turn off the machine at the main switch or disconnect the power supply be-
fore extinguishing a fire source.
2.9.2
Electrical hazards
Warning!
Directly or indirectly touching live parts may result in electrocution!
• Turn off the main switch before opening the door of the switchboard cabinet.
• Pull the power plug or deactivate the power supply before working on electrical
components.
• Electrical components are not protected against spray water. The proprietor must
implement appropriate protective measures
2.9.3
Laser radiation (special equipment)
Information!
Important informations about the laser!
• The used laser is a laser class 1 according to DIN EN 60825-1:2008-05. The
accessible laser radiation is harmless.
2.9.4
Mechanical hazards
Danger!
Running saw band may cause serious severance injury!
Descending saw bow may pinch the operator!
• The machine may only be operated by one person.
• Before running the saw band or lowering the saw bow, the operator must ensure
that the work area is clear.
• When starting the work process make absolutely sure that no body parts (arms,
hands, etc.) are within the danger area.
Danger!
Danger of crushing during operation of the machine!
Crushing of limbs when pulling down the saw bow!
When starting the work process make absolutely sure that no body parts (arms,
hands, etc.) are within the danger area.
2.9.5
Heat hazards
Attention!
After sawing the hot saw band may burn the operator!
Wear protective gloves during repair work or allow the saw band to cool down be-
fore touching it.
2.9.6
Environmental hazards
Attention!
Plastic waste and used saw bands contaminate the environment.
Dispose of all shavings, plastic waste and used saw bands according to locally applica-
ble legal stipulations.
3
Technical data
3.1
General information
Machine construction
• Robust, torsion-resistant machine stand and saw frame made of steel
• Saw-band redirection with ball bearings
40
ENGLISH