Preparing / Placing / Moving - Sportplus SP-MR-011 Mode D'emploi

3. Preparing / Placing / Moving

Filling and emptying the tank
6. Remove the tank lid (33) from the upper tank cover.
7. To fill the tank with water, insert the funnel (77) into the tank and then use a cup or
the pump siphon (76) and the bucket to fill the tank (see Fig. A). Use the water level
indicator on the side of the tank to measure the desired water level.
8. To empty the tank, see Fig. B. Place the bucket next to the rower and use the pump
siphon (76) to pump the water from the tank into the bucket.
9. Insert the tank lid (33) into the upper tank cover. Wipe any excess water from the
frame.
Note:
• Fill the tank with tap water only. Add
included*). Never use pool chlorine or chlorine bleach. This will damage the tank
and void the warranty.
• Add a water cleaning tablet once every
cloudy, replace the water in the tank.
• Water from the tank is not suitable for drinking. Dispose of the water after pumping
it from the tank.
*Warning!
Hazardous to health if swallowed. In case of contact with eyes, immediately rinse
thoroughly with water and seek medical attention. After use, thoroughly wash hands with
water and soap. Store out of the reach of children. Store at a cool, dry location.
1 water cleaning tablet
6 months or as needed. If the water remains
36
(1 package is