General Power Tool Safety Warnings - Güde GTK 800 Traduction Du Mode D'emploi D'origine

EnGlISH
18
Symbols
Caution!
Read the Operating Instructions
before carrying out any work on the machi-
ne, disconnect the plug from the socket.
Always wear goggles when using the
machine.
Wear ear protectors!
Wear protective gloves !
Never put your hands and feet near the
rotating parts.
Protect against humidity
Never expose tool to rain.
Keep children and other persons inclu-
ding animals in a safe distance when
using the appliance.
Keep distance of persons!
Observe to keep out of dangerous zone
Warning against bounced subjects
Warning against dangerous electric
voltage
Warning against hand injuries
Protect against humidity
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
This side up

General Power Tool Safety warnings

warnInG
read all safety warnings and all instructions. Failu-
re to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
Tischkreissäge GTK 800_1.1.indd 18
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
1) work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while ope-
rating a power tool. Distractions can cause you to
lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radia tors, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords incre-
ase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp loca tion is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk
of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
A moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will
reduce personal inju ries.
c) Prevent unintentional starting. Ensure the
switch is in the off-position before con necting to
power source and/or battery pack, picking up or
carrying the tool. Carry ing power tools with your
finger on the switch or energising power tools that
have the switch on invites accidents.
GTK 800
11.01.12 10:53