Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GTK 800
Technical Data
Circular table saw
Art. No ................................................................................55146
supply ........................................................... 230 V/ 50 Hz
Rated input..............................................................800 W
Idle speed ...................................................... 2950 min
Saw blade dia. x hole dia ..................... 200 x 16 mm
Riving knifestärke ..............................................2,2 mm
Cutting depth max. 90° .....................................45 mm
Cutting depth max. 45° .....................................27 mm
Weight ...............................................................ca. 12,5 kg
warning: The vibration emission level will vary because of the ways in which a power tool can be used and may
increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down
or when it is running but not actually in use. This may significantly reduce the vibratory load over the total
working period.
measures stated in the service manual. Act responsib-
ly toward third parties.
In case of any doubts about connection and operati-
on refer please to our customer center
Specified Conditions of Use
The circular saw is only intended to cut wood and
wood like products.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
Stock having a round or irregular cross
section (such as firewood) must not be cut, as it
can not be securely held during cutting.
requirements for operating staff
The operating staff must carefully read the Opera-
ting Instructions before using the appliance.
because wrong using of the appliance can be risky,
only competent persons are allowed to operated it.
Operator must be trained properly concerning adjust-
ment, operation and appliance using.
Qualification: Apart from the detailed instructions
by a professional, no special qualification is necessary
for appliance using.
minimum age: Persons over 18 years of age can
only work on the appliance. An exception includes
youngsters trained in order to reach knowledge
under supervision of the trainer during occupational
education.
Tischkreissäge GTK 800_1.1.indd 17
GTK 800
Read and understand the opera-
ting instructions before using the
appliance. Abide by all the safety
noise and Vibration Information
Sound pressure level L
pA
Sound power level L
........................................110 db (A)
1)
WA
Wear ear protectors!
Vibration emission value a
-1
Measured according to EN 61029,
1)
Uncertainty K=3 db (A)
Measured according to EN 61029
2)
Protection Class ...................................................................II
Training: Using the appliance only requires corre-
sponding training by a professional or the Operating
Instructions. No special training is necessary.
The operator is responsible for accidents or risks to
third parties.
residual risks
Danger of injury !
Always keep hands away from the path of the saw
blade.
In spite of compliance with all relevant design
regulations, dangers may still present themselves
when the machine is operated, e.g.:
- work piece parts being thrown off,
- parts of damaged tools being thrown off,
- noise emissions,
- wood dust emissions.
Emergency procedure
Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. For the sake of eventual
accident, in accordance with DIN 13164, a workplace
has to be fitted with a first-aid kit. It is essential to
replace any used material in the first-aid kit immedia-
tely after it has been used.
If you seek help, state the following pieces of infor-
mation:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
EnGlISH
......................................97 db (A)
1)
............................... <2,5 m/s
2)
2
h
11.01.12 10:53
17
Publicité
Table des Matières
