Illustration Of Sandblasting Gun And Sandblasting Gun Set; Intended Use; Safety Instructions - Güde 40046 Traduction Du Mode D'emploi D'origine

3 Illustration of sandblasting gun and sandblasting gun set

Pos. Description
1 Trigger
2 Plug connection for air supply
3 Blasting material container
7 Holding fixture for blasting material container
8 Blasting nozzle
9 Valve
10 Lifting bolts
11 Dust collection bag
12 PVC moulded parts

4 Intended use

This sandblasting gun is a handy device powered by compressed air for effective removal of rust on
small surfaces such as car bodies, motorbike frames etc.
Sandblasting gun set
The sandblasting gun set is environmentally friendly, creating no dust. The blasting material used goes
back into the dust collection bag and can be used again. The PVC moulded parts included allow it to
be used in various positions such as inner edges, outer edges etc.

5 Safety instructions

- Protective gear, in particular safety goggles and respiratory protection, must be worn
- The sandblasting gun must not be used in areas at risk of explosion
- Do not misuse the sandblasting gun
- Do not use flammable materials
- Keep compressed air devices and tools away from children
- Never point the sandblasting gun at people or animals
- Connect compressed air using a quick connect coupling only
- The operating pressure setting must be set using a pressure regulator
- Do not use oxygen or combustible gases as a source of energy
- Only use original spare parts
- Before carrying out maintenance or troubleshooting, disconnect the device from the source of
compressed air
- Take precautions to ensure that other people are not inconvenienced (dust formation)
- Ensure that the blasting material is collected so that it can be disposed of in an environmentally
responsible manner.
- Do not use silica sand (toxic silicosis formation)
- Never forcefully open blasting material containers
10
EN