Troubleshooting; Warning - MSA ALTAIR Pro Mode D'emploi

3. Exclusion of Consequential Damage - Purchaser specifically
understands and agrees that under no circumstances will
MSA be liable to Purchaser for economic, special, incidental
or consequential damages or losses of any kind whatsoever,
including but not limited to, loss of anticipated profits and any
other loss caused by reason of non-operation of the goods.
This exclusion is applicable to claims for breach of warranty,
tortious conduct or any other cause of action against MSA.

Troubleshooting

• The ALTAIR Pro Single Gas Detector will operate reliably when
handled and maintained properly. If the instrument becomes
inoperative, follow the Troubleshooting Guidelines in TABLE 5-1;
these represent the most likely causes of a problem. You may
return inoperative instruments that are under warranty to MSA:
• MSA North America
Repair and Service Department
1000 Cranberry Woods Drive
Cranberry Township, PA 16066-5207
1-800-MSA-INST
• To contact MSA International, please call:
• 1-412-967-3000 or 1-800-MSA-7777
Repair or alteration of the ALTAIR Pro Single Gas Detector,
beyond the procedures described in this manual or by any-
one other than a person authorized by MSA, could cause the
instrument to fail to perform properly. Use only genuine MSA
replacement parts when performing any maintenance proce-
dures described in this manual. Substitution of components
can seriously impair instrument performance, alter intrinsic
safety characteristics or void agency approvals.
FAILURE TO FOLLOW THIS WARNING CAN RESULT IN
SERIOUS PERSONAL INJURY OR DEATH.
5-2

" WARNING