Periodic Inspection Table - OREC Snow Bull Manuel D'utilisation

7.3

Periodic inspection table

★Neglecting inspection and maintenance is a cause of accidents and damage. Perform inspection
referring to [Periodic voluntary inspection table] in order to always keep the machine functioning
correctly. Perform annual inspection once a year and monthly inspection once a month, and starting
checks every time you use the machine.
Check for:
Condition at startup,
abnormal noise.
Power and acceleration state
State of exhaust and gas
leakage
Air filter damage, loosening,
Engine
cleanliness
(Main
Loosening of the attachment
body)
of cylinder head and
manifolds
Valve tappet clearance
Compressive pressure
Engine base cracking or
deformity, loosening of nuts
and bolts
Quantity, cleanliness.
Engine
Lubricati
on
Oil leakage
Fuel leakage
Fuel filter blockage
Engine
Fuel
Fuel quantity/quality
Engine Loosening damage to
Electrics electrical wires connections
Dirtying of air filter element
Engine
Purity
Element breakage
Weeds etc clogged in the
recoil cover
Engine
Cooling
Accumulation of weeds in
the muffler
Loosening
Belt
Damage, cleanliness
Abnormal noise, strange
heat/movement
Trans
mission
Oil quantity, cleanliness
Oil leakage
Inspection Content
Desired Result
Machine starts up easily.
Power increases gradually and
smoothly.
Exhaust color, smell, and sound are
normal.
No damage, loosening, or noticeably
dirty.
Gas leak, cracking, noticeable
corrosion.(Tightened to the correct
torque, not loose)
Clearance looks straight.
Compressive pressure looks straight.
The engine base is not cracked or
deformed and the nuts and bolts are
secure.
Oil quantity is suitable, not dirty or
mixed with any water or metals.
Oil seal and gasket are not leaking
oil.
Fuel is not leaking。
Not dirty, deformed, or clogged.
There is fuel in the engine and it is of
good quality.
Harness connections are suitable,
not loose or damaged.
Air filter element is not dirty.
Element is not torn or worn out.
Recoil cover is not clogged with
weeds.
There is no accumulation of weeds
around the muffler.
There is suitable tension on the belt.
Not cracked, damaged, dirty.
There are no abnormalities, strange
noises or heat, when running the
machine.
There is a suitable quantity of oil and
it is clean.
Oil seal, packing parts are not
leaking oil.
-32-
D: Daily M: Monthly Y: Yearly
:
Inspection
.
freq
D M Y