Loading - OREC Snow Bull Manuel D'utilisation

4.2

Loading

WARNING
To avoid damage, accidents, or injury, be sure to follow all instructions below, regarding
loading and unloading the machine.
・ When loading into a vehicle, be sure to check the area around you, and choose
for stability.
・ Use a ramp designed for the job, be sure it is wide and sturdy enough and that the machine
stays in the middle of the ramp. Always use the lowest forward gear to load, and reverse to
unload.
・ Do not change speed while you are loading or unloading, and unload slowly.
・ When loading the machine, secure it with rope and take care not to damage cables or plastic
parts of the machine. Do not secure it so tightly that you change the shape of any parts.
Loading
Secure with Rope
DANGER
・ Always stop the engine and close the fuel valve when you transport by vehicle. Leaking fuel can
ignite.
・ Also please do not tilt the machine more than necessary. There is a risk of leaking fuel.
・ While loading, raise the plow so
that it doesn't touch the ground.
・ Be sure your ramp is wide
enough to accommodate the
change in the center of gravity as
you move up the ramp. Stay to
the center.
・ Secure with a rope that is strong
enough to hold the machine
during transportation. Be sure the
machine doesn't move.
-19-
a flat surface