OREC Snow Bull Manuel D'utilisation page 26

5.2.6 How to adjust each cable
Drive clutch cable
Main clutch cable
Speed change cable
* Tension adjustment tips: Take out the transmission cover and check the length of the speed
Tighten: move the adjust nut to the direction of an arrow.
Loosen: move the adjust nut to the direction of an arrow
・ Adjust the position of the adjust nut when:
-The machine stops driving
-The machine doesn't stop immediately, or can't move
the machine manually.
・ Adjust the position of the adjust nut when:
-The belt slips when the main clutch lever is ON
position and the driving clutch lever is ON position.
-The belt rotates when the main clutch lever is OFF
position.
・ Adjust the position of the adjust nut when:
-If the speed change lever won't stay in "R" position, when
the machine takes load.
-If the speed change lever won't stay in 2
position, when the machine takes load. Or the speed
change lever won't move to "R" position.
change shaft when the speed change lever is in 2
at the proper tension if there is 0-1mm space between speed change
arm and shaft.
-25-
...Tighten the cable
...Loosen the cable
...Tighten the cable
...Loosen the cable
... Tighten the speed change cable
... Loosen the speed change cable
n d
speed
n d
speed position. It's