Long Term Storage - OREC Snow Bull Manuel D'utilisation

5.3

Long term storage

5.3.1 Fuel
If you do not plan to use the machine for more than 30 days, please follow these procedures for proper
storage. If the machine is not stored properly, gasoline can spoil causing damage to the engine; it may
fail to start, or you may have difficulty running the machine.
DANGER
・ Please perform maintenance in a place that is well ventilated. Gas fumes can fill a room and
cause illness or accidents.
・ Before working on the machine, switch off the engine and remove the spark plug cord.
・ Store the machine on a flat surface in a place protected from the elements and is well ventilated
and cool.
・ When removing fuel, do not work near lit cigarettes or other sources of open flame. Also, keep
fireworks and firearms away as there is a danger of the machine catching fire.
・ When removing fuel, be sure that the engine and muffler have cooled before touching the
machine. There is a danger of burns. Take care to dispose of fuel in accordance with local laws
and regulations.
4. Wash all parts well.
- Clean the recoil starter, air filter, muffler, around the carburetor, and inside the belt cover by blowing air
through them to remove dirt and dust.
- Remove rust from affected areas and apply anti-corrosion paint.
- If you continue to operate with an accumulation of grass and dust in the machine, the engine can become
clogged, causing it to overheat and possibly catch fire.
5. Refuel and lubricate the necessary parts and have any defective parts repaired
6. Cover the machine to keep dust out.
1. Empty fuel from inside the fuel tank and the
carburetor. To
carburetor, remove the drain screw from underneath
and allow any fuel to flow into an approved container.
2. Clean away any fuel on the outside of the engine or
machine with a rag.
3. Please replace the engine oil.
Refer to [ Replacing Engine Oil ]
-27-
remove fuel from inside the