OREC Snow Bull Manuel D'utilisation page 19

4.1.3 STOP
WARNING
・ Always stop on a flat area. Stopping on a slope may cause the machine to tip, or loss of control.
・ Please always stop the engine if you must leave it unattended.
[How to stop the engine in emergency]
[How to stop the machine in normal conditions]
・ Clean the machine of dirt, snow and water after operation. This helps, ensure safe operation
next time.
・ Push the engine stop switch to kill the engine.
・ If you kill the engine, please move each lever to the
correct position. See "How to start the engine" section
for re-start.
・ Release the driving clutch lever then move the main
clutch lever to "START" position.
・ Move the throttle lever to the low position then push
the engine stop switch to stop the engine.
・ Close the fuel valve.
-18-