OREC Snow Bull Manuel D'utilisation page 14

3.2 Inspection of engine oil level
CAUTION
・ To avoid injury, make sure the engine has cooled down before checking oil.
・ This machine is shipped WITHOUT engine oil. Fill with engine oil to the correct level before
starting the engine, even if there are traces of residual oil in the engine from factory testing.
・
Please always use the proper quality oil, see below. The proper oil for the outside temperature
will ensure the best performance.
・ After refueling the oil, make sure to tighten the dipstick, to prevent leaking.
Recommend type of oil
Summer [over 50°F]
Winter [under 10°F]
・ To check the oil level, place the machine on a flat
surface. Unscrew the dipstick and inspect, using oil
gauge. Check oil level by inserting and removing the
dipstick without screwing it into the filler hole. If the
oil level is low, add oil to the upper level
SAE30， SAE10W-30， or SAE40
SAE5W20, or SAE10W-30
-13-