Oil Change - OREC Snow Bull Manuel D'utilisation

5.1.2 Inspection of transmission oil, How to change
・ To maintain optimum performance, change oil as recommended
・ To prevent overfilling, pour oil slowly.
■ After changing the oil, please dispose of waste oil in accordance with local laws and regulations.
＜ Inspection＞
1. Remove 2 clips on transmission cover, and lift the
2. Loosen check plug (M6 bolt) as shown in the picture.
3. Check oil level and quality. Replace if necessary.
＜ Oil Change＞
Recommendation
s t
1 time: after 20Hrs, thereafter: every 100Hrs
cover.
There is enough gear oil if the oil comes out through
that hole.
Replace oil after the first 20 hours of operation and
roughly every 100 hours thereafter. Use an approved
container for the old oil. Remove the drain plug from
the bottom right side of the transmission case. Drain old
oil and replace the drain plug securely. Fill with 0.8 US qt
(0.75L) of transmission oil (SAE 90 or SAE 80W-90) by
pouring through the oil inlet.
-21-