OREC Snow Bull Manuel D'utilisation page 29

5.3.2 Lubrication for storage
・ Please lubricate moving parts, sliding surface and attaching portion of lever. This will help the
machine to operate correctly and prevent damage.
5.3.3 The following should be performed before the next operation:
・ Always use fresh fuel.
・ Inspect the machine before operation.
・ Check that all functions work.
・ Check any abnormal noise or heat by working a little bit.
・ Do not overwork for the first 2-3 hours to break in the machine.
・ Check that all bolts and nuts are tightened properly.
・ Check for, and repair any leaks.
*If you see any traces of oil, contact your dealer before operation.
When lending this machine to another person
WARNING
When lending this machine to another person it is the owner is responsible for following:
・
The owner should explain how to operate the machine and require the new operator to fully read
these instructions. The owner should then guide the new operator until they have a
comprehensive understanding of the machine's operation and safety guidelines. The owner should
lend these instructions to the new operator with the machine.
・
When lending this machine to a person who cannot read English, the owner should take
responsibility for fully explaining its safe operation
・
The owner holds responsibility for the management of this machine, including checking that all
parts are correctly attached and that all functions are working correctly before lending it to anyone.
-28-