How To Operate The Machine; How To Start The Engine - OREC Snow Bull Manuel D'utilisation

4. How to operate the machine

4.1 Start & Stop
WARNING
・ Always use the machine in a well ventilated area, and never indoors.
・ Start the engine on a flat surface after verifying the area is free of obstructions.
・ To avoid injury please do not stand next to crawler.
・ If it is difficult to move on the icy ground due to the track slipping, hold the handle firmly to enable
track to grip the snow then move forward slowly.
・ Mark obstacles, grooves, slopes or soft ground so you can avoid those areas.
・ To avoid burns, do not touch the muffler while operating the machine. Let it cool for at least 10
minutes before touching, or covering for storage.
Be sure to avoid injury and accidents by reading and understanding all instructions.
4.1.1

How to start the engine

・ Move the main clutch lever to the "START" position,
and release the driving clutch lever.
・ Move the fuel valve lever to the ON position.
・ To start a cold engine, move the choke lever to the
CLOSED position.
*To restart a warm engine, leave the choke lever in
the OPEN position.
-14-