Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Driving clutch lever
Throttle lever
Speed change lever
WARNING
・ When you chose "R" , the machine moves toward your foot. Check around and behind for safety,
then lower the engine speed to keep working.
CAUTION
To change speed ALWAYS start the engine and move the main clutch lever to the work position
and release the driving clutch lever. Shifting speed change lever while you are grasping driving
clutch lever may break the gear inside of the transmission.
For operation
"GRASP"
...
Starts moving.
"RELEASE" ...
Stops moving
・ This action is only when the main clutch lever is in
"WORK" position.
Move the throttle lever to adjust the engine RPM, and
use to adjust the speed of driving and the pressure of
pushing snow.
"Move right"
...
Lower the engine RPM
"Move left"
...
Raise the engine RPM
Shift the lever when you change the speed.
" R "
... Reverse
" 1 "
... Forward slowly
" 2 "
... Forward fast
・ Make sure that the lever is fixed at the right position.
・ The machine may not move backward if the plow gets
stuck in the snow. If this occurs, lower the handle to
raise the plow higher than snow.
-9-
Publicité
Chapitres
Table des Matières
