OREC Snow Bull Manuel D'utilisation page 17

4.1.2 Operation (Removing the snow)
CAUTION
・ Always wear appropriate winter wear and shoes, gloves, hats, etc. for safe operation.
・ Always operate the machine from behind the track at the center, and hold firmly.
WARNING
・ Be aware of your surroundings when changing directions, especially forward to reverse, and
reverse to forward. When you are operating in reverse, the machine moves toward your feet –
be sure you have removed any tripping hazards.
・ Raise the plow, by pushing the handle down, to move backward.
・ Always stop the engine if you leave it unattended.
・ Move the main clutch lever to the "WORK" position.
Then shift the speed change lever to change speed.
CAUTION
To change speed ALWAYS start the engine and
move the main clutch lever to the work position. If
the gear won't move easily, do not force the gear
shifted. Try to move forward or backward or grasp
the driving clutch lever then shift the speed change
lever firmly. If shifting speed is inadequate, there is
a possibility of gear failure, which is dangerous.
・ Grasp the driving clutch lever. Start working after the
machine moves. Adjust speed using throttle lever.
・ Raise the plow above snow when you turn the
machine.
・ The machine stops moving when you release the
driving clutch lever.
・ Release the driving clutch lever to change the speed.
After the machine stops, you can shift the speed
change lever. Grasp the driving clutch lever to start
moving.
-16-